Enter to Win!

You Could Be the Winner of a

FREE SMITH DRUM ASSEMBLY!*

Send us a 1:00 – 2:00 minute video of your SMITH equipment in action, and you’ll be in the running for a

FREE SMITH drum assembly valued up to $2500!*

All video must be of SMITH machines only.

Marking removal, groove inlay, sidewalk grinding, scarifying, surface prep – whatever it is you do with your SMITH machines, we want to see it! You could win one of two valuable prizes:

1st Place

Coarse Carbide Flail Drum or
Coarse Erase Spindle

*Maximum MSRP – $2500 USD.  For SMITH and compatible machines. No substitutions. Must meet eligibility requirements for all prizes. Excludes PCD drums.

See below for specifics.

2nd Place

Cutter Drum Rebuild Kit
For Your SMITH Machine

Includes cutters, spacers, shafts, bushings (if applicable), and a tube of Loctite® for your SMITH Machine. Drum and retaining plates not included. Maximum MSRP – $2000 USD

First Place:

504.4021.5.2516.8M flail drum*

Second Place:

Cutter drum rebuild kit
Includes cutters, spacers, shafts, bushings (if applicable), and a tube of Loctite® for your SMITH Machine. Drum and retaining plates not included.

First Place:

65050.2516.8C (or XC) flail drum*

Second Place:

Cutter drum rebuild kit
Includes cutters, spacers, shafts, bushings (if applicable), and a tube of Loctite® for your SMITH Machine. Drum and retaining plates not included.

First Place:

1065051.75.2128.10C flail drum*

Second Place:

Cutter drum rebuild kit
Includes cutters, spacers, shafts, bushings (if applicable), and a tube of Loctite® for your SMITH Machine. Drum and retaining plates not included.

First Place:

169068.PM.3000A Erase-it spindle*

Second Place:

Spindle rebuild kit
Includes PM3000NA spindle cutters

First Place:

Three (3) 169068.PM.3000A Erase-it spindles

Second Place:

Spindle rebuild kit
Includes PM3000NA spindle cutters

Instructions:

Using your phone’s camera, GoPro™ or other video camera, shoot 1-2 minutes of your SMITH machine in action. Please keep the image in focus and steady, without too much jiggling, panning, or sudden camera movements. Include before and after shots (before/after photos will suffice).

All personnel operating machines MUST use the proper OSHA-approved PPE, including respirator, eye protection, and ear protection. A dust control vacuum system is also strongly recommended.

The emergency-brake lanyard should also be attached to the belt loop of the operator when the machine is running. Once completed, please submit your video using the form below.

Using your phone? Make sure hold it properly:

WRONG WAY

RIGHT WAY

** For videos above 8MB, please send to jwn@smithmfg.com using WeTransfer.com, or other method for sending large files.

Winners to be annouced on October 1, 2021. Good luck!

Must be 18 years of age or older to enter. Void where prohibited. No purchase necessary. No substitutions. Shipping costs and taxes are the sole responsibility of the winner(s). Winners will be notified via email and/or telephone. All submissions become the property of SMITH Surface-Prep Solutions, a Graco company. Submitted videos may be used for promotional purposes.